by ArtF » Thu May 22, 2014 2:50 pm
Hi John:
I uploaded a fix. First, the depth was a bug. ( The pin hole isn't, it wont create a path if the tool is too large, the pin is likely too small for that tool. )
The main reason for this update is the graphics. When I swapped to Imperial to check a 4" escapement, I got weird lines on my gears and objects.. In tracing I found it was the orthogonal limits, which were 9999,-9999 for the Z axis, works fine in Metric, but I got bad artifacts in imperial. Changing them to +- 100 for inch usage fixed the problem, so if you've had weird shadows on your objects this upgrade should fix it. Its a problem that I always work in Metric, it means I often dont see things you see in inches.. sorry for that bug if indeed anyone else was affected. Could'a just been me.
Thx
Art
Hi John:
I uploaded a fix. First, the depth was a bug. ( The pin hole isn't, it wont create a path if the tool is too large, the pin is likely too small for that tool. )
The main reason for this update is the graphics. When I swapped to Imperial to check a 4" escapement, I got weird lines on my gears and objects.. In tracing I found it was the orthogonal limits, which were 9999,-9999 for the Z axis, works fine in Metric, but I got bad artifacts in imperial. Changing them to +- 100 for inch usage fixed the problem, so if you've had weird shadows on your objects this upgrade should fix it. Its a problem that I always work in Metric, it means I often dont see things you see in inches.. sorry for that bug if indeed anyone else was affected. Could'a just been me.
Thx
Art