GearHeads Forum

Ok Thanks,
now it works but I got one over speed error, not a big deal because it might be, because of some canned gcode commands. I try to adapt now the PP. The problem, as mentioned in the video of Timothy is, that you can not really test a PP in detail, because the paths through the software ...

Hi Art,

the following error code: "45:11:82 Error in load at line 17424 : Error:-38 "
in the line 17424:"Line 17424: No XY in Arc on XY Plane.
And if you look at the attached png you see one lonely blue circle which is wrong.
I also attached the gcode, so you could reproduce the error, if you have ...

Ok, may I say guys ...

But here something to think about.
I got it almost done with different files, different models and so on, but then .... error. I now know why and tried to adapt different PPs in Fusion.
So here is my Prob:
in only one single line of several 10000 lines I get this stupid ...

Daer Art,

I love it, perhaps surprisingly for you to hear, that is at least good news, because I have not to deal with them. I for certain know, that e.g. N will work, but is not necessary, because you have already line numbering. And that is the charm of Auggie especially for beginners!
We know ...

Ok Dan, I misinterpreted the short forms and assumed an important secret.
I think there are some canned cycles, which I mean Auggie can operate with. Here a list from WIKI:
I made an empty line behind each Code. Can anybody make a "+" if it works with Auggie and a "-" if not.
I checked some lines ...

Hello Guys,

After work, at first I had to make some cakes for my collegues this afternoon.
Now I promise a small tutroial for using Fusion 360 with Auggie.
I will not make a pp, thats trmendous work. At the moment I ask myself what is that discussion with M3 and M4???
Dan, I see you love it. For M3 ...

Hi Art,

just looked at configuring a pp for Auggie, but it does not seem to be necessary. I am experiemnting with setting using the mach2 (because its older? with less features??). And beside pocket, contour now I checked the settings for adaptive clearing a feature which is called on other ...

Hi I have to tell you, that not all fusion files work fine ... but some errors are gone. But .. whole saturday night and whole sunday was needed to fix all issues (hopefully all)
1st compliment to Art,
the errors are gone, but sometimes I get Estops with overspeed. Why, well first my setup in ...

Hi Art,

Here are some "not working" examples ...
I tried to send them some minutes ago ... but not all files are allowed ... so now as zip
In Auggie I get at some lines an Estop ... (Log: Overspeed)
In Mach3 I get strange circles, but I can see the part as preview
In Estlcam I get also starnage ...

Hi all,
perhaps somebody could help me in my first steps:
I have build a simple geometry in Fusion 360. I used Mach 3 post processor. Now I get some error messages e.g. error 42 (means arc radius too small for endpoint). Changing the postprocessor to genric fanuc or teensy I get some other errors, e ...