Re: getting the 57cnc to work with G540

DanL · Post by **DanL** » Wed Apr 06, 2016 10:36 pm

Hi art is M30 working running some tests now as I type

Post by **ArtF** » Wed Apr 06, 2016 11:20 pm

Dan:

Should be as of last version. Ill probably release a new version tomorrow that fixes the imaging
output as well as several other stability bugs. It also fixes the calling order of all M calls

Art

DanL · Post by **DanL** » Wed Apr 06, 2016 11:36 pm

I grab the new version and test again

DanL · Post by **DanL** » Thu Apr 07, 2016 12:16 am

M30 still fails.

Auggie is very stable being on the net at the same time as running the machine it's a no no but is a good test, spindle control is within 220 rpm

Post by **ArtF** » Thu Apr 07, 2016 1:30 am

Dan:

Thx, tomorrows release should fix it then. As to Net, probably dependent on machine.

I burned images today while reading EMail and transferring images from my phone on USB.

Make sure you try "Network Delay = 0" in the planner config if you experience any stuttering.

Art

Post by **ArtF** » Thu Apr 07, 2016 11:11 am

Dan:

Current version is now online, Ive been cutting, ( well, burning..) for a couple
days with no M30 issues at all, so let me know if and how it fails..

Thx , good luck
Art

MaynardC · Post by **MaynardC** » Thu Apr 07, 2016 12:40 pm

Hi Art,

I'm getting some strange behavior when I open the new version (1.45). Installs as usual, but when I start it, it hangs after the sliding splash screen. Auggie icon is in the task bar. Auggie gui doesn't load. If you ckick on the Auggie Icon in the taskbar, the Auggie Gui appears(after a delay), but the components are all scrambled about. If you change screens(default for example), that loads fine,and if you switch back to the Pockeys screen, that works fine (and seems to work fine in simulation). I opened the log file, but seems to be some sort of infinite loop thing, as the log file crashes my text editor. Couldn't copy and paste from the editor,as it was hanging, so took following screenshot of the file. Happen all over again, on each Auggie startup. I tried rolling back one version, and it still happened ???

Maynard

Post by **ArtF** » Thu Apr 07, 2016 1:00 pm

Maynard:

Sorry about that, I probably hosed the simulator, Ill check it right way and let you know..
it looks like your going into simulation and its crashing it or looping it.

(I take it this IS without a Pokeys? )

Thx
Art

Post by **ArtF** » Thu Apr 07, 2016 1:12 pm

Maynard:

Just uploaded a version with the simulator incapable of generating that error.

Give it another shot. If it fails, try removing your script folder just in case,
Ive tested the one I released on 2 machines with no pokeys and both worked fine,
I'm suspecting maybe I changed something in the script interface perhaps..

Thx
Art

MaynardC · Post by **MaynardC** » Thu Apr 07, 2016 1:37 pm

I was in simulation, but also hung with Pokeys, but with slightly different behavior.
Tried new version, but same results.

Removed script directory and loads fine. Jogs a stepper connected with Pokeys using the PokeysMotion screen. I have a bunch of custom scripts. Perhaps you've changed some API's along the way. I haven't updated Auggie for a few weeks, so it could go back a bit.

Thanks
Maynard