Re: getting the 57cnc to work with G540

[ArtF]

Maynard:

Some of the API's did change and they may be causing a loop. When you get a chance, see if you can figure out which one it is and send me the library..I can probably stop the loop..

Thx
Art

[MaynardC]

I added the folders back to the script folder one by one, starting with default Auggie libraries, than onto my custom libs. Ran fine at each step, and now loads fine back at the original state. Sorry to interrupt this thread, but all seems fine now.


Maynard

[ArtF]

No sweat:

  It may be it simply was resetting to some new defaults. Ive been adding many fixes and reliability updates as I use it and find things that annoy or don't work.

Art

[ArtF]

Thought Id show my wiring.. for those that have asked about plugs and such..



Art

[DanL]

Hi art M30 is still not working the log does not show anything, I ran with the scripter open it comes up that it is blocked.

I ran it with a couple different G codes

[ArtF]

Hi Dan:

  Thx, Ill keep trying to find out why, M30 works here with no problem.

  Im curious, if you put a line after the m30 , does it get executed?

Art

[DanL]

yer I tried that M5 then M30 no different even had M5 go to the Axis zeros then M30. it stop's 3 lines before M30. new profile as well.  I have to have a sit down with the machine and see if I can find it my end, but I have a router to go fix some one did not watch where they where walking

[ArtF]

Dan:

  Are you sure it updated to 1.45? It did used to stop 3 lines before the m30..

Art

[DanL]

yep just checked I will do a uninstall and reinstall see if that helps

[DanL]

reinstall did not help