David C. Roy's Monarch II

Files, photos and discusions on Tickers and kinetic devices.
ArtF
Global Moderator
Global Moderator
Posts: 4557
Joined: Sun Sep 05, 2010 5:14 pm
Contact:

Re: David C. Roy's Monarch II

Post by ArtF »

Dan:

  Very nice. Thanks for that post.. migth hvae to turn that into a module...

Art
DHelmick

Re: David C. Roy's Monarch II

Post by DHelmick »

Here is a short video of the cams and
Disc...before the large wheel is added...

Still experimenting with different shape
Cams and tweaking it...

Seems to work fine...

http://youtu.be/ATSht4ba29Y

Dale
ArtF
Global Moderator
Global Moderator
Posts: 4557
Joined: Sun Sep 05, 2010 5:14 pm
Contact:

Re: David C. Roy's Monarch II

Post by ArtF »

thats DOES look good..!

Art



DHelmick

Re: David C. Roy's Monarch II

Post by DHelmick »

Here is something I threw together...need to add gears to increase run time
Still adjusting the balance ..but it runs perfect..

Power is supplied by a Chrome Vanadium Thumb adjustable weight..(Crescent Wrench)

I am going to get a couple constant force
Spring motors and experiment with those..

http://youtu.be/jTxCsfCMz_s

Side View
http://youtu.be/6rUHdRNfS7Y
Last edited by DHelmick on Wed Dec 03, 2014 10:17 pm, edited 1 time in total.
ArtF
Global Moderator
Global Moderator
Posts: 4557
Joined: Sun Sep 05, 2010 5:14 pm
Contact:

Re: David C. Roy's Monarch II

Post by ArtF »

Nice long runtime..

Art
DHelmick

Re: David C. Roy's Monarch II

Post by DHelmick »

I think you may be right about small magnets in the "butterfly" shaped pawls..After watching the close up video over and over  till my eyeballs almost fell out...I see the "free" pawl move quickly towards the center...(brass rods) when it nears the trapped Pawl...no matter what direction it is turning...but when it goes backwards....this action moves it towards the pin..the free pawl then pops out clears one pin and then gets caught on the next..releasing the spring energy.....

https://www.youtube.com/watch?v=ZfBsNsWvvJw

Hmmmmm...I am going to experiment with small rare earth mags and see what happens..

Dale
Last edited by DHelmick on Wed Dec 03, 2014 10:46 pm, edited 1 time in total.
ArtF
Global Moderator
Global Moderator
Posts: 4557
Joined: Sun Sep 05, 2010 5:14 pm
Contact:

Re: David C. Roy's Monarch II

Post by ArtF »

Dale:

  Its how my bat does it.. a small rare earth pulls the latch inwards at the rigth point... I get the feeling he doesnt use any though...

Art
DHelmick

Re: David C. Roy's Monarch II

Post by DHelmick »

Then it must be MAGIC!!!
RG
Site Admin
Posts: 8
Joined: Sun Oct 26, 2014 7:13 pm

Re: David C. Roy's Monarch II

Post by RG »

DHelmick wrote: I think you may be right about small magnets in the "butterfly" shaped pawls..After watching the close up video over and over  till my eyeballs almost fell out...I see the "free" pawl move quickly towards the center...(brass rods) when it nears the trapped Pawl...no matter what direction it is turning...but when it goes backwards....this action moves it towards the pin..the free pawl then pops out clears one pin and then gets caught on the next..releasing the spring energy.....

Dale
I think so too...I'm going to order a few small rare earth magnets and run some tests.

Roger
ArtF
Global Moderator
Global Moderator
Posts: 4557
Joined: Sun Sep 05, 2010 5:14 pm
Contact:

Re: David C. Roy's Monarch II

Post by ArtF »

It does work, that Bat in the ticker video runs with small rare earths.. it just always seemed like cheating to me.. I suspect theres a clever little latch or somethign in there... :)

Art
Post Reply