Page 12 of 21
Re: Arduino based Laser Control
Posted: Mon Oct 20, 2014 7:53 pm
by DanL
yea that's what I meant to say, my bits will be turning up tomorrow so I will start putting it to together I am going with the screen, pot, buttons and led
Re: Arduino based Laser Control
Posted: Wed Oct 22, 2014 4:26 am
by DanL
Hi all I have received some of the bits need for this project forgot to order a screen.
I have been using the serial monitor the first thing I have found is I have to run the baud rate at 2400 so it works any higher it does not work very well at all.
there are a couple of other things that don't seem to be working right I will play some more and see what happens
Re: Arduino based Laser Control
Posted: Thu Oct 23, 2014 1:01 am
by ArtF
Hi Dan:
I havent played much with the serial monitor, in the YUN I use the console which works a bit different..
The LCD panels can be found on Ebay pretty cheaply.. but they take awhile to get form China. No rush, dont feel
pressured to catch up or anything... this is one of those long term do as you can type projects for me as well.
Art
Re: Arduino based Laser Control
Posted: Thu Oct 23, 2014 3:55 am
by DanL
I have some things not working as expected but cant do anything about to I get the screen that's between 1 week to 4 weeks from now.
I will work on other projects to then.
Re: Arduino based Laser Control
Posted: Thu Oct 23, 2014 4:37 pm
by Mooselake
There's always Sparkfun, Adafruit, Digikey, Mouser, etc. if you want to pay more to get one in a hurry. Get a few extras off eBay anyway; you can never have too many spare parts (which is why the moosecave is packed full...)
Kirk
Re: Arduino based Laser Control
Posted: Fri Oct 24, 2014 11:58 am
by ArtF
Kirk:
Yeah, gotta admit .. I have a few things laying about as well... Helps to have spare parts lying about when your playing..
Art
Re: Arduino based Laser Control
Posted: Fri Oct 24, 2014 9:42 pm
by DanL
hi art just an idea it looks like console is a yun function so it wont be needed on other boards so might as remove it correct me if I am wrong
edit it can be change to Serial.print
Re: Arduino based Laser Control
Posted: Sat Oct 25, 2014 12:12 am
by ArtF
Dan:
Very true, its why I havent initialized it in the sketch.. not required if not a yun..
Art
Re: Arduino based Laser Control
Posted: Sat Oct 25, 2014 1:47 am
by DanL
I had to change some bits to get it to work it seems to be working.
I will posts my changes when I can plug everything up.
this will be so you know you have a Leonardo version working out there (first version) can you put up your changes when ever what I have is enough to play
Re: Arduino based Laser Control
Posted: Sat Oct 25, 2014 6:05 pm
by ArtF
DanL:
Heres the version Im currently using with 100 levels of power for any selected power. The pot selects the power
for the NGrave mode and Darwin always sends 0-100% as the control word, so you use the pot on the panel as
a sort of brightness control for the engraving..
Art