Page 1 of 1
Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Fri Oct 12, 2018 4:26 pm
by BobL
Hi;
Here's the result of a few inlay test examples we come up with over the last few weeks, results are pretty good in my opinion. Thought I'd share with everyone to see.
Cheers
Bob
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Fri Oct 12, 2018 10:06 pm
by John T
Having done some of this inlay work I know the effort required - Congratulations
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Wed Oct 17, 2018 8:53 am
by tweakie
Excellent work Bob.
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Sat Oct 20, 2018 8:14 pm
by BobL
Was Art and I actually, but thanks guys.
Cheers
Bob
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Sun Oct 21, 2018 5:44 am
by tweakie
Excellent work Bob and Art. ;D
Tweakie.
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Tue Oct 23, 2018 9:48 am
by TOTALLYRC
The Zebra inlay is very nice. Maybe when I grow up I will be able to do it as nicely as you have.
Mike
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Tue Oct 23, 2018 1:26 pm
by ArtF
Mike:
Before you get the idea we dealt with tweezers and lots of parts, heres how the Zebra was made.
1) Engrave B&W photo of zebras into wood. 12 minutes.
2) Flip and reverse image and burn into a piece if 1mm veneer to 3/4mm deep ( picture shows result).
3) Apply glue and push veneer into wood. Let dry.
4) Sand away 1/4mm of veneer.
Art