Auggie Version 3.3 released.
Posted: Wed Feb 20, 2019 4:03 pm
Hi All:
Auggie V2.3 is released to add Probing control for zeroing and such. The command
is either of
G31 XxYyZzAa Fff
G38 XxYyZzAa Fff
And a script control is available for inverting the probes default state.
GlobalSet("ProbeInvert", 1 or 0 );
The script command ex: Engine.GCode("G31Z-5F5"); is also
made available so that things like probing can be scripted.
Probing may be done in any vector direction, the resultant
hit point is not yet available to a script, so this is really just useful
for accurate zeroing.
Probing is new and lightly tested, please test in the air if you
value your probe tip.
Thx
Art
Auggie V2.3 is released to add Probing control for zeroing and such. The command
is either of
G31 XxYyZzAa Fff
G38 XxYyZzAa Fff
And a script control is available for inverting the probes default state.
GlobalSet("ProbeInvert", 1 or 0 );
The script command ex: Engine.GCode("G31Z-5F5"); is also
made available so that things like probing can be scripted.
Probing may be done in any vector direction, the resultant
hit point is not yet available to a script, so this is really just useful
for accurate zeroing.
Probing is new and lightly tested, please test in the air if you
value your probe tip.
Thx
Art