Hi Art,
When designing a clock using the Chrono - I can set the gear thickness for the gears but not for the Chrono mechanism - am I missing the thickness set up on the chorine - where is it?
Chrono Material thickness
-
John T
- Site Admin
- Posts: 432
- Joined: Tue Oct 05, 2010 8:53 pm
Chrono Material thickness
1% inspiration 99% try, try again
-
ArtF
- Global Moderator
- Posts: 4557
- Joined: Sun Sep 05, 2010 5:14 pm
- Contact:
Re: Chrono Material thickness
Hi John:
They are set to 50% the thickness of the ratchet. It seemed reasonable at the time. My thinking is it was more a display issue as the GCode output is easily modified for any thickness.. however, STLs and other solids have become increasingly important, so I will add a method to
reset those to user selectable thicknesses..
Art
They are set to 50% the thickness of the ratchet. It seemed reasonable at the time. My thinking is it was more a display issue as the GCode output is easily modified for any thickness.. however, STLs and other solids have become increasingly important, so I will add a method to
reset those to user selectable thicknesses..
Art