David C. Roy's Monarch II

[DHelmick]

Cut out a few pawls...
Going to set up a test jig and see what happens..

[SEOSearch [Crawler]]

I have been getting my constant force springs for my kinetic art from SDP in the past. I went to buy some and found they are out of stock. They always seem to be out of stock. I see that the springs are manufactured by Ametek Hunter Springs but they will only sell in quantities of 50 pieces. So is there another source?
Dan Mauch

[ArtF]

Dan:

Ive only bought them once from vulcan.. min order was 100.00 , turned out they werent constant force..but they worked anyway. Vulcan still doesnt have any I dont think.. Let me know if you find a source.. I may want a couple myself.. Close to time to do a bat as a posted project I think...

Art

[DHelmick]

I see plenty in stock for the Negator springs...

Different Torques ...Here is an example...$27.69

Spring Torque
5.5 lb-in

Fatique Life
2500 Cycles

Spring Length
175"

Spring Thickess (t)
0.01"

Spring Width (W)
0.625"

Material
301 Stainless Steel

Drum Size(storage)
1.28"

Drum Size( Output)
2.23"

[SEOSearch [Crawler]]

The size I need are the ones 3/8" wide. They report out of stock. I'm not positive but thinmk that is what daid used.
Dan

I see plenty in stock for the Negator springs...

Different Torques ...Here is an example...$27.69

Spring Torque
5.5 lb-in

Fatique Life
2500 Cycles

Spring Length
175"

Spring Thickess (t)
0.01"

Spring Width (W)
0.625"

Material
301 Stainless Steel

Drum Size(storage)
1.28"

Drum Size( Output)
2.23"